Fire Doors – Maintenance

Safesmart can carry out repairs, replacements and upgrading to non-compliant fire doors and final fire exit doors using fully certified material from approved manufacturers. Repairs and upgrading can include the following:

  • Adjust or resize the door to ensure frame to door gaps are consistently 3mm – 4mm.
  • Fit new BS EN1935 fire rated hinges to replace non-fire rated or worn hinges.
  • Fit new Part M compliant overhead door closers fully certified to EN1154, EN1634 and Certifire approved CF388.
  • Fit electro magnetic hold open overhead door closers fully fire tested to BS EN163.
  • Fit fire rated glazing to FRG 30/60 standard.
  • Replace damaged intumescent door strip, or router out and install intumescent door strip with combined smoke seal or separate Certifire approved cold smoke seal.
  • Fit alarm activated door hold-open devices.
  • Fit lever handles tested to EN1906.
  • Fit locks and latches designed to meet the requirements of BS EN12209.
  • Fit final exit panic hardware conforming to EN1125 for panic exit applications and EN179 for emergency exit applications.
  • Fit FD30 of FD60 fire doors in either paint grade or veneered finishes complete with all relevant hardware. Doors can be fitted individually or as a door set, which includes the frame.

Safesmart can carry out a fully comprehensive inspection of all your fire doors. Upon completion of fire door and final fire exit door inspections, a report is produced detailing the condition of each door and listing the areas of non-compliance, which creates a database and asset register for future on-going inspections that is kept on your Smartlog account.

Need a quote?

If you would like a quote for our solutions, please fill out this form and a member of the team will contact you to discuss your requirements

Alternatively, please use the details below to contact us:

Phone our offices on 08701 273999 Or 01908 320152

Send us an email direct to info@safesmart.co.uk



Smartlog Info